Fully-Supported Tread & Riser

Wausau Tile
media/products/Fully-Supported-Tread-Riser-1.jpg
media/products/Fully-Supported-Tread-Riser-2.jpg
media/products/Fully-Supported-Tread-Riser-1.jpg
media/products/Fully-Supported-Tread-Riser-2.jpg

Item Added To Quote

Continue Browsing Go To Quote


Request A Sample

Available in six different styles and several finishes and colors to accommodate your next project, Wausau Tile’s fully-supported tread and risers are full of strength, durability and classic design. Our treads have a 2” minimum thickness and must be fully supported on a full concrete substrate or pan. Our treads can be radial or straight and can have tapered ends per your design.

×

Too Many Sample Requests

You may only request 10 Samples. Please remove a sample before adding any more.

Cancel Go To Sample Form

Available Colors


Available Colors

Acid Wash
A20 White Thumbnail Image

A20 White

A21 Buff Thumbnail Image

A21 Buff

A22 Sand Thumbnail Image

A22 Sand

A23 Gray Thumbnail Image

A23 Gray

A24 Brick Red Thumbnail Image

A24 Brick Red

A25 Brown Thumbnail Image

A25 Brown

A26 Charcoal Thumbnail Image

A26 Charcoal

A30 Star Thumbnail Image

A30 Star

A31 Fog Thumbnail Image

A31 Fog

A33 Misty Gray Thumbnail Image

A33 Misty Gray

A38 Night Thumbnail Image

A38 Night

Ground & Polished
Light Grind
Weatherstone

Tests

Type Result Method Size
Compression Strength Wausau Tile standard is 5000 PSI at 28 days. ASTM C39 -
Water Absorption Wausau Tile standard is less than 6%. ASTM C642 -
Flexural Strength Non-Standard ASTM C78 (3rd party test: American Engineering) -
C373 Water Absorption Not-Applicable - -
C482 Bond Strength Not-Applicable - -
C485 Warpage Edge Tolerance of +/- 1/8" 100% Visual inspection of product, Straight edge confirmation as needed. -
C485 Warpage Diagonal Tolerance of +/- 1/8" 100% Visual inspection of product, Straight edge confirmation as needed. -
C499 Nominal Size Tolerance of +/- 1/8" 100% Inspection, Measurements verified against fabrication drawings. -
C499 Thickness Tolerance of +/- 1/8" 100% Inspection, Measurements verified against fabrication drawings. -
Dynamic DCOF Non-Standard, As specified for walking surfaces only. ANSI 326.32017 (3RD PARTY: TCNA) -
ANSI A173.1 Section 9.6.1 Not-Applicable (Tile only) - -
Avg. Polished Finish 100% Visual Inspection Visually compare product to control sample -
Avg. Honed Finish 100% Visual Inspection Visually compare product to control sample -
Freeze/Thaw Non-Standard ASTM C666 (3rd Party, American Engineering) -
Center Load Not-Applicable (Pavers only) - -

Similar Products

 Planter Walls
Planter Walls

Planter Walls

 Wall Panels
Wall Panels

Wall Panels

 Self-Supporting Tread & Risers
Self-Supporting Tread & Risers

Self-Supporting Tread & Risers

 Tree Grates
Tree Grates

Tree Grates